How to clean vacuum cleaner hose | Follow Steps

How to clean vacuum cleaner hose
How to clean vacuum cleaner hose (STEPS)

At, we understand how important maintaining your vacuum’s performance is. A clogged hose can cause your vacuum to lose suction power, and cleaning it is essential to keep your vacuum functioning properly. In this article/Blog, we will guide you through the process of unclogging and How to clean vacuum cleaner hose step by step.

How to clean vacuum cleaner hose (STEP TO FOLLOW)

best pool vacuum hose
How to clean vacuum cleaner hose?

Keeping your vacuum cleaner hose clean is essential to maintaining its optimal performance. Over time: dirt – dust, & debris can accumulate in the hose, affecting the vacuum cleaner’s suction power and leading to unpleasant odours.

However, cleaning the hose can seem like a daunting task, especially if you’re not sure where to start. Here are some steps to help you clean your vacuum cleaner hose effectively.

Step 1: Gather Your Tools

Before you begin cleaning your vacuum hose, you will need the following tools:

  • A screwdriver
  • Scissors
  • A long, thin object (such as a coat hanger or plumbing snake)
  • A clean, dry rag

Step 2: Disconnect the Hose

The first step in cleaning your vacuum hose is to disconnect it from the vacuum. Carefully remove the screws or clips that hold the hose in place using a screwdriver. Be sure to keep the screws or clips safe, so you don’t lose them.

Step 3: Remove Any Debris

Once you have disconnected the hose, take your long, thin object and gently insert it into the hose. Move the thing back and forth, careful not to force it too far into the hose. This will help dislodge any debris that may be clogging the hose.

Next, take your scissors and cut away any visible debris that you can see inside the hose. Be sure to cut away any hair, string, or other materials tangled in the hose.

Step 4: Rinse the Hose

Once you have removed any visible debris from the hose, rinse it thoroughly with warm water. Be sure to rinse both ends of the hose, and use a gentle stream of water to avoid damaging the hose.

Step 5: Dry the Hose

After rinsing the hose, use your clean, dry rag to remove any excess water. Be sure to dry both ends of the hose thoroughly.

Step 6: Reconnect the Hose

Once the hose is completely dry, reconnect it to your vacuum. Replace any screws or clips that you removed in step 2.

Step 7: Test Your Vacuum

Turn on your vacuum and test the suction power. Repeat the cleaning process or seek professional help if the vacuum still malfunctions.


Cleaning your vacuum hose is essential to keep your vacuum functioning properly. By following these simple steps, you can effectively unclog and clean your vacuum hose and maintain your vacuum’s performance. Remember to check your vacuum hose regularly for clogs and debris, and clean it as needed to keep your vacuum working like new.

FAQ: about Cleaning Vacuum Hoses

Qus: What is the best way to clean a vacuum hose?

A: Cleaning your vacuum hose is a crucial part of keeping your vacuum working efficiently. Here are the steps you can follow in cleaning your vacuum hose:

  1. Detach: The first step is to detach the hose from the vacuum.
  2. Remove Debris: Next, remove any visible debris and clumps of dirt that are inside the hose.
  3. Wash: Use a bottle cleaning brush to wash the inside of the hose.
  4. Rinse: Rinse the inside of the hose thoroughly.
  5. Dry: Allow the hose to dry completely before reattaching it to the vacuum.

Qus: How do I clean the inside of a hose?

A: Cleaning the inside of a hose is important to keep it free from bacteria and dirt. Here is a step-by-step guide to cleaning the inside of a hose:

  1. Disconnect: Disconnect the hose and drain any remaining debris from it.
  2. Sanitize: Pour a sanitizing solution into the hose until it fills the entire hose.
  3. Drain: Disconnect both ends of the hose and drain the sanitizing solution from it.
  4. Store: Store the hose in a clean and dry place until its next use.

Qus: What can I use to unclog a vacuum hose?

A: Unclogging a vacuum hose is easy if you follow these steps:

  1. Grab: Use a pair of needle-nose pliers to grab the clog.
  2. Pinch: Pinch the blockage with the pliers to get a good grip on it.
  3. Pull: Pull the clog out of the hose and discard it.

Qus: How can I prevent my vacuum hose from clogging?

A: Here are some tips to prevent your vacuum hose from clogging:

  1. Pick up large debris: Pick up any large debris before vacuuming.
  2. Vacuum what you can see: Make sure there are no hidden objects, such as socks, under the bed before vacuuming.
  3. Use an attachment: Attachments are narrower than wands, which are narrower than the hose, preventing clogs.

Qus: How can I clean dirty vacuum tubes?

A: Use a glass cleaner or alcohol to clean your vacuum tubes. Treat them as you would any glass surface. If the pins are corroded, use a cleaning solution or steel wool to clean them.

Please support us by following us on LinkedIn –