How to Use the Pureclean Xl Rolling Steam Cleaner on Carpet

Carpet cleaning can be a daunting task, especially when you have to deal with tough stains and dirt. Thankfully, the Pureclean XL Rolling Steam Cleaner makes the job easier and more efficient. This powerful cleaner uses steam to remove dirt, stains, and odors from carpets and other surfaces. In this article, we will show you how to use the Pureclean XL Rolling Steam Cleaner on carpets.

Step 1: Preparation

Before you start cleaning your carpet, you need to prepare the Pureclean XL Rolling Steam Cleaner. First, fill the water tank with water and turn the unit on. Allow the unit to heat up for a few minutes until steam starts to come out of the nozzle. Attach the microfiber cleaning pad to the bottom of the unit. You are now ready to start cleaning.

Step 2: Vacuum the Carpet

Before using the Pureclean XL Rolling Steam Cleaner, you need to vacuum the carpet to remove any loose dirt and debris. This will help to ensure that the steam cleaner can penetrate the carpet fibers and remove any dirt and stains. Use a vacuum cleaner with a strong suction power to ensure that you remove all the dirt and dust from the carpet.

Step 3: Start Cleaning

Now that you have prepared the Pureclean XL Rolling Steam Cleaner and vacuumed the carpet, you are ready to start cleaning. Hold the cleaner with both hands and move it back and forth over the carpet. Make sure to apply even pressure to the carpet as you move the cleaner. The steam from the cleaner will loosen the dirt and stains from the carpet fibers, while the microfiber pad will absorb the dirt and moisture.

Step 4: Work in Sections

It is best to work in small sections when cleaning your carpet with the Pureclean XL Rolling Steam Cleaner. This will ensure that you cover the entire carpet and remove all the dirt and stains. Start by cleaning one section of the carpet and move on to the next section once you are satisfied with the results.

Step 5: Allow the Carpet to Dry

After you have finished cleaning the carpet with the Pureclean XL Rolling Steam Cleaner, you need to allow the carpet to dry. This may take a few hours, depending on the humidity and temperature of the room. Make sure to keep pets and children away from the carpet while it is drying to avoid any accidents.

Step 6: Clean the Microfiber Pad

After you have finished cleaning the carpet, you need to clean the microfiber pad. This will ensure that the pad is ready for the next use. Remove the pad from the bottom of the steam cleaner and wash it in warm water with mild detergent. Rinse the pad thoroughly and allow it to air dry. Once the pad is dry, you can attach it back to the steam cleaner and store the unit until the next use.

Conclusion

The Pureclean XL Rolling Steam Cleaner is an excellent tool for cleaning carpets and other surfaces. By following these steps, you can ensure that your carpet is cleaned thoroughly and efficiently. Remember to work in small sections, apply even pressure, and allow the carpet to dry before using it again. With the Pureclean XL Rolling Steam Cleaner, you can achieve a clean and fresh carpet in no time.