How to Clean Shark Rocket Vacuum: Tips & Tricks

To clean a shark rocket vacuum, remove the dust bin and filters, tap off debris, and wash the bin and filters with soap and water. Shark rocket vacuum cleaners are versatile, lightweight, and powerful machines that make cleaning a breeze.

However, it’s not uncommon for the hose and filters of the vacuum to get clogged with dust, hair, and debris, which can hinder its performance. If left uncleaned for too long, the suction power may weaken, and the motor may overheat.

That’s why it’s essential to know clean your shark rocket vacuum regularly. In this article, we will provide a step-by-step guide on how to clean shark rocket vacuum and keep it running efficiently.


Getting Started

If you own a shark rocket vacuum, you know that it can easily get clogged with dirt and debris. Regular cleaning is essential for keeping your vacuum in good working condition. In this post, we will provide you with step-by-step instructions on how to deep clean your shark rocket vacuum, starting with the materials needed for the process.

1. Materials Needed

To deep clean your shark rocket vacuum, you will need the following materials:

  • A screwdriver
  • Cleaning solution
  • Microfiber cloth

Before you begin the cleaning process, make sure you have all these materials ready.

2. Disassembling Your Vacuum

To get the best cleaning results, you will need to disassemble your shark rocket vacuum. Follow these simple steps:

  • Unplug the vacuum to ensure your safety.
  • Remove the dustbin by pressing the button on the handle and pulling it out.
  • Using a screwdriver, remove the screws from the bottom of the vacuum.
  • Gently remove the brush roll cover, being careful not to damage any of the parts.
  • Take out the brush roll and wash it with soap and water.
  • Remove the filter cover by pulling it down, then popping it off.
  • Remove the filters and wash them with water.
  • Clean the inside of your dustbin using a microfiber cloth.

By following these steps, you can easily disassemble your shark rocket vacuum and clean it to perfection.

Now that you have disassembled your vacuum and have a clear idea of the materials needed for deep cleaning, you can proceed with the cleaning process. With regular deep cleaning, you can keep your shark rocket vacuum in top condition and ensure that it performs its cleaning duties effectively.

Cleaning The Dust Cup

1. Importance Of Regularly Cleaning The Dust Cup

Cleaning your shark rocket vacuum’s dust cup is a crucial component of maintaining your vacuum’s performance. Without regular cleaning, dust, dirt, and other debris can build up and clog your vacuum’s suction, leading to weaker suction power. Regularly cleaning your shark rocket vacuum’s dust cup will help keep it working efficiently, and you’ll get the most out of your vacuum.

2. Steps To Remove And Deep Clean The Dust Cup

Regularly cleaning the dust cup of your shark rocket vacuum is a straightforward process that you can complete in just a few minutes. Here are the step-by-step instructions to remove and deep clean the dust cup:

  • Turn off and unplug the shark rocket vacuum.
  • Press the button to release the dust cup from the handheld vacuum unit.
  • Hold the dust cup over a bin or garbage can and press the button to release the bottom flap. All the dirt will fall into the bin or the dumpsite.
  • Remove the filter from the dust cup by sliding it out. If you notice that the filter is damaged, it is best to replace it with a new one.
  • Rinse the dust canister with water until the dirt and debris are completely washed away.
  • Allow the dust canister to air-dry completely. This may take up to 24 hours, so be sure to plan accordingly.
  • Once the dust cup is fully dry, re-insert the filter back into the cup.
  • Reattach the dust cup to the handheld vacuum unit, ensuring that it clicks into place.

By following these simple steps, you can help extend the life of your shark rocket vacuum while maintaining its performance for months and years to come.

Cleaning The Filters

Cleaning your shark rocket vacuum’s filters is crucial to keep the machine running at peak performance. The filters capture dust, dirt and allergens, ensuring clean air is released back into your home. Over time, filters get blocked with debris and dust, and cleaning them regularly is essential to maintain your vacuum cleaner’s suction power and efficiency.

In this blog post, we will provide you with step-by-step instructions on how to clean different types of shark rocket vacuum filters.

1. What Are The Roles Of Filters In Your Shark Rocket Vacuum’s Performance?

Filters play a crucial role in enhancing your shark rocket vacuum’s cleaning performance. Here are some of the roles that the filter plays:

  • Captures dust, dirt and allergens effectively, ensuring clean air is released back into the air.
  • Prevents your machine’s motor from sucking in large debris that can harm its power and efficiency.
  • Protects your home from dust and allergy-casuing elements that can pose significant health hazards.

2. How To Clean Different Types Of Shark Rocket Vacuum Filters

Shark rocket vacuum cleaners have different types of filters that need cleaning regularly. Here is how to clean them;

3. Cleaning The Foam & Felt Filters

Foam and felt filters are washable and need cleaning at least once a month. The following are the steps to follow while cleaning:

  • Turn the vacuum off and unplug it from the power source.
  • Remove the dustbin and release the two filters from the vacuum cleaner.
  • Rinse the two filters, ensuring that water passes through the foam filter until no more dirt comes out.
  • Squeeze out all excess water from the filters.
  • Allow the filters to air-dry for at least 24 hours. Make sure they’re completely dry before inserting them back into the vacuum cleaner.

4. Cleaning The HEPA Filter

Hepa filters capture smaller particles, including pet dander, pollen, and dust mites and need thorough cleaning every three to six months. Here is how you can clean them:

  • Turn the vacuum cleaner off and, if applicable, unplug it from the power source.
  • Locate the hepa filter inside your vacuums and remove it.
  • Use a soft-bristled brush or a clean, dry microfiber cloth to brush dirt and debris from the filter.
  • Rinse the filter under a cold tap to remove remaining dirt and debris until clear water flows through it.
  • Place the filter in a clean towel and squeeze out excess water.
  • Leave the filter to air dry for 24 hours or until it’s completely dry.
  • Reattach the filter to your vacuum cleaner after ensuring that it’s completely dry.

With these simple step-by-step instructions, you can keep your shark rocket vacuum cleaner filters clean and durable, which will in turn help ensure it works at optimum performance for many years. Remember to follow these guidelines to help keep your filters and the vacuum cleaner in excellent condition.

Cleaning The Brush Roll

How to clean shark vacuum filter

Cleaning the brush roll: tips to keep your shark rocket vacuum in top shape

You probably know how important it is to keep your vacuum in good condition to maintain its optimal performance. And when it comes to handheld vacuums like shark rocket, the task could be even more challenging. In this section, we’ll discuss the significance of regularly cleaning the brush roll for optimal longevity.

1. Discuss The Importance Of Regularly Cleaning The Brush Roll For Optimal Performance And Longevity.

Maintaining your shark rocket vacuum is crucial to ensure that it continues to run correctly. The brush roll is a vital component that plays a critical role in cleaning your floors effectively. It not only picks up debris but also helps to lift and remove dirt and pet hair embedded in carpets and upholstery.

A dirty brush roll can significantly affect your vacuum’s performance, and you may even experience issues such as blockages and reduced suction power.

2. Provide Step-By-Step Instructions For Removing And Deep Cleaning The Brush Roll.

To ensure that your vacuum is operating as it should be, we’ve put together a simple step-by-step guide on how to remove and deep clean the brush roll on your shark rocket vacuum.

  • Unplug the vacuum and lay it on its side on a flat surface.
  • Locate the brush roll cover and remove it by pressing the release button on either side.
  • Lift the cover off to expose the brush roll.
  • Remove the brush roll by gently pulling it out from the vacuum.
  • Use scissors, tweezers, or a brush to remove any debris, hair, or string that has wrapped around the brush roll.
  • Soak the brush roll in warm soapy water for about thirty minutes.
  • Rinse the brush roll thoroughly with clean water.
  • Allow the brush roll to dry completely and reinstall it back into the vacuum.
  • Replace the brush roll cover by aligning it with the vacuum and snapping it into place.

By cleaning the brush roll regularly, you’ll prolong its life and keep your shark rocket vacuum operating at peak performance. If you follow these simple instructions and clean your brush roll every few months, you’ll help prevent blockages and loss of suction power, and ultimately extend your vacuum’s longevity.

Cleaning The Hose And Attachments

If you want your shark rocket vacuum to maintain its peak performance, it is crucial to keep every component clean. Probably you’re already aware of how crucial it is to empty the dustbin or change the filters, but it’s also essential to clean the vacuum cleaner hose and attachments regularly.

Here’s how to do it effectively and effortlessly:

1. Explain The Importance Of Regularly Cleaning The Hose And Attachments For Optimal Performance.

Cleaning the hose and attachments of your shark rocket vacuum is essential for optimal performance. Dirt and debris can accumulate in the hose or stick to attachments, clogging them and reducing suction power. To keep your vacuum operating efficiently, it is crucial to clean the hose and accessories regularly.

2. Provide Step-By-Step Instructions For Deep Cleaning The Hose And Attachments.

Here’s a step-by-step guide on deep cleaning the hose and attachments of your shark rocket vacuum:

  • Detach the hose and all attachments from the vacuum.
  • Depending on the type of dirt or debris accumulated, fill the sink or a large bowl with warm, soapy water or a mixture of water and vinegar.
  • Dip the hose and all attachments into the cleaning solution and let them soak for a few minutes.
  • Use a soft-bristle brush to clean the hose and attachments inside and outside. Ensure that you scrub the brush bristles over all surfaces, including hard-to-reach areas such as crevices and corners.
  • Rinse the hose and all attachments thoroughly with clean water to remove all the cleaning solution and dirt.
  • Squeeze the excess water out of the hose and attachments gently.
  • Allow all the parts to air-dry completely before assembling them back onto the vacuum. Ensure that there is no moisture remaining, as this can cause mold and unpleasant odors.
  • Once the hose and attachments are entirely dry, attach them back onto the shark rocket vacuum.
  • Run the vacuum on a few test surfaces to confirm that the components are working appropriately and optimizing suction power.

That’s how to clean the hose and attachments of your shark rocket vacuum quickly and easily. Cleaning these parts may seem like a hassle, but it’s a small price to pay to ensure the longevity and optimal performance of your vacuum.

Reassembly And Testing

How to Remove Roller Brush From Shark Lift-Away Vacuum

1. Reassembly And Testing: Getting Your Shark Rocket Vacuum Back In Action

Cleaning your shark rocket vacuum is an important part of maintenance, but the work is not done once you finish deep cleaning. You need to reassemble the parts correctly and test your vacuum to ensure it is performing at its best.

Follow these simple steps to get your vacuum back in action again.

2. Reassembling Your Shark Rocket Vacuum

When reassembling your shark rocket vacuum after cleaning, follow these steps:

  • First, find all the parts you removed during disassembly.
  • Look for any signs of damage that may have occurred during cleaning.
  • Carefully reattach the parts, ensuring that each fits securely and correctly.

3. Tips For Testing Your Shark Rocket Vacuum Performance

After reassembly, it is essential to check that your vacuum is working correctly. Here are some tips to test your shark rocket vacuum performance:

  • Straighten out your vacuum’s cord and plug it in to the wall outlet.
  • Turn on the vacuum and listen for any unusual sounds from the motor or brushroll.
  • Test your vacuums suction power by vacuuming a small area and checking if debris was properly picked up.
  • Check all the attachments to make sure they connect properly.
  • Adjust settings depending on the surface you’re cleaning to see if suction power is right.

These tips will ensure that you avoid unnecessary damage or disrepair to your shark rocket vacuum after cleaning and can keep your vacuum performing just as it’s supposed to.

best vacuum cleaner for arthritis sufferers
Click Image to read full blog

FAQs For How To Clean Shark Rocket Vacuum

How Often Should I Clean The Shark Rocket Vacuum?

You should clean your shark rocket vacuum once a month or more frequently if you use it regularly or have pets. Keeping it clean ensures that it functions properly and efficiently.

How Do I Empty The Dust Cup Of The Shark Rocket Vacuum?

To empty the dust cup, hold it over a trash can and press the release button. Then, lift the dust cup away from the shark rocket vacuum and dump the contents into the trash can. Finally, return the dust cup to its original position.

How Do I Remove Hair And Other Debris From The Shark Rocket Vacuum Brush Roll?

To remove hair and other debris from the brush roll, turn off the shark rocket vacuum and unplug it. Then, use scissors or a comb to carefully remove the hair and debris from the brush roll. Be sure to clean the brush roll regularly to prevent clogs.

How Do I Clean The Shark Rocket Vacuum Filter?

To clean the shark rocket vacuum filter, remove the dust cup and filter cover by pressing the eject button. Then, carefully remove the filter. Wash the filter in cold water and let it air dry completely before replacing it.

How Do I Clean The Shark Rocket Vacuum Attachments?

To clean the shark rocket vacuum attachments, detach them from the vacuum and wash them with warm, soapy water. Be sure to rinse and dry them thoroughly before reattaching them to the vacuum.


Maintaining a clean and healthy environment is always crucial in ensuring an optimal living standard. In this light, owning a shark rocket vacuum is an excellent choice. It is, however, vital to understand that regularly cleaning this gadget is critical to prolong its lifespan and enhance its performance.

Effective cleaning of the shark rocket vacuum necessitates a few steps, including cleaning the filters, removing dirt cups, disassembling the brush roll and cleaning its parts, and finally, assembling all parts and testing the vacuum’s functionality. By following these practical steps, your shark rocket vacuum remains in top-notch condition, and its efficiency is guaranteed.

This affordability and user-friendly gadget will bring different cleaning dimensions to your cleaning routine. Incorporating and frequently following the above cleaning guidelines, it is just a matter of time before you elevate your cleaning to the next level.